Microblading for beginners: how to choose a good microblading machine?
Microblading machine is an important tool for embroiderers to tattoo eyebrows, the quality of the machine is very critical, not because of fancy packaging, technical misleading advertising words and wrong choice, quality selection is necessary from the following aspects.
I often hear some microblading peers say.
As long as you have the ability
Any machine can do good work!
I think that is not true.
I think it is not true, but the quality of products used by embroiderers with comparable skills
There is a big difference in the eyebrows made by the different quality products used by the same skilled embroiderer.
So, how can you tell the difference between good and bad microblading machines?
1, machine noise.
Microblading machine assumes that there is a lot of noise, will make the embroiderer and customer uneasy, especially the customer, will not relax, resulting in mental tension, skin accelerated contraction of the phenomenon, good adhesion of pigment, there will be a tingling sensation. Therefore, the noise level is an important indicator for purchasing the machine. Usually the running Microblading pen is about one meter apart from the customer, and the customer does not feel the obvious irritation as the principle, otherwise it is too much noise.
2、Machine speed.
The speed of the Microblading pen machine is related to the size of the customer’s pain, the faster the speed, the smaller the pain. The newest generation of Microblading machine can adjust the speed infinitely, so the customer basically can’t feel the pain. When you buy a machine to check, launch the needle on the tattoo machine and scratch the needle back and forth on the hard paper, a dense sound is a fast speed, otherwise it is slower.
3, needle stability and safety out of the needle to determine whether the Microblading machine needle stability, the general choice of visual inspection method.
The needle length should be consistent, not long and short, and then pull out the needle sleeve, and see if the needle is in a straight line (the same needle) when the machine is turned on, because the fineness and flow of the line during operation depends on the stability of the Microblading machine. Assuming that the needle tip runs in a fan shape, it means that the needle out is not stable. Safe needle out means being able to control the depth of the needle tip piercing into the skin consistently to avoid the embroiderer from using it improperly to pierce the needle tip too deeply into the skin.
4、Machine design.
Microblading machine is a kind of hand-holding thing, in order to facilitate embroiderers to use it flexibly, the body planning is very important, hand-sensing comfortable and simple, the planning must be precise, dexterous, the center of gravity should be stabilized in the center. Most of the prevalent plans on the market use straight pen type plans, which are easy to use for a long time, without fatigue.
5、Length of use.
The length of use of the Microblading machine affects the economic efficiency of the embroiderer, the noise level of the Microblading machine, whether the speed is stable. Whether or not there is a device to avoid color reflux, etc. will affect the length of use of the Microblading machine. Nowadays, there are some businessmen in the market who deliberately increase the speed of the machine very high to show the performance of the machine, which mislead many embroiderers, but ignore the increase of the repair rate.
The quality of the machine is not very related to the price, buy a few thousand tens of thousands is not necessarily a good machine, a few hundred machines also have good products.
If you think this article is helpful to you, please share it so that more people can see it.
