7 Ways to Pick Out a Good PMU Machine
Embroidery tools and embroidery techniques complement each other, and as embroidery techniques are updated and iterated, the machines are also upgraded. Then embroiderers have to learn to choose the right machine, newbies may just enter the industry and lack familiarity with the machine’s. Today, I’m going to tell you what PMU machines are good for embroiderers to use and learn how to go about selecting an PMU machine.
When it comes to the working principle of pmu machine is relatively well understood, through the motor rotation, drive the oblique crankshaft to make the needle up and down back and forth, pmu machine speed and torque is an important indicator to measure it good or bad.
1, look at the power.
If the power of the machine is small, the speed will be slowed down when it meets the resistance, the strength of the needle will be poor, and it will not go deep enough into the skin, so the strength of the machine is very important for the coloring effect.
2, look at the rotational speed.
The greater the rotation speed, the faster the speed of the needle, which is more conducive to coloring, and vice versa, the slower the coloring, so when we choose an pmu machine, we must understand the rotation speed of the machine.
Therefore, a fast rotation speed, high torque and strong power of the pmu machine are the prerequisites to ensure good operation.
In addition to the torque and speed, we then need to understand the safety of the machine, the stability of the needle, the length of the needle and the noise of the machine.
3, look at the safety
Machine safety is really important and needs to be done to prevent flying needles from occurring. We need to know the needle locking device of the pmu machine, whether it can lock the needle piece steadily, otherwise it will be dangerous if there is a flying needle to hurt someone.
4, see the needle stability
A good machine is one that has a smooth needle output and does not swing from side to side, refusing to shake the needle.
5, see the needle length
Needle length can be adjusted, the operation of different eyebrow shape, different parts of the needle length is not the same, there is no standard data, only the reference value. We still need to make adjustments at the right time during normal operation, then adjust to our desired length.
6, look at the machine noise
Motor operation will generally have a sound, the noise can not be too loud, manufacturers will be designed to mute the machine, this is a test of technology. Noisy machine is not recommended to choose, will affect the guest’s sense of experience. No guest, willing to always have a “bomber” in the ear ringing.
7, see the needle stability
Machine operation will inevitably bring heat, heat dissipation effect should be good, heat dissipation is not enough to support our continuous operation of the machine, while heat dissipation is not good machine life will inevitably be relatively short.
There is no perfect existence in this world, so I hope embroiderers can analyze the advantages and disadvantages rationally and comprehensively, and choose reasonably with the actual and their own needs. Choose the pmu machine with fast speed, strong power, smooth needle output, with locking device, low noise and good heat dissipation, this kind of machine is good to use, I believe you can make a clear choice.
